There isn't a single number that applies to every tub, because the variables that drive the cost aren't the same from yard to yard. Size is the obvious one, a compact two-person spa is a different job than a six-person swim spa, but it's rarely the deciding factor on its own.
Access usually matters more than size. A tub that can be rolled or carried out through a side gate in one piece is a straightforward job. A tub that was set in the backyard before the fence, deck, or landscaping went in around it has to be cut apart on-site, and that takes more time and more labor than a clean carry-out.
Condition plays a role too. A tub that's already drained and disconnected is ready to go. One that's still full of water, still wired in, or has a cover and skirting that need to come off first adds steps before the actual removal even starts.
It's possible, and plenty of handy homeowners have done it, but it's worth being honest about what it actually involves. The circuit has to be shut off at the main panel, not just the tub's own control panel, before anyone touches the wiring. The water has to be fully drained before the shell is moved, since a tub that's still full can weigh well over a ton. And if the tub won't fit back out the way it came in, it has to be cut into sections with a reciprocating saw, which is a slower and messier job than it sounds.
Then there's disposal. Most curbside trash pickups won't take a hot tub shell, and bringing one to a landfill or transfer station yourself means renting a truck or trailer, loading several hundred pounds of material, and often paying a dump fee on top of it. For a lot of people, once the electrical, the draining, the cutting, and the hauling are all added up, it stops looking like a weekend project.
You don't need to do much, but a few things ahead of time make the job faster for everyone.
Everything else, the draining if it hasn't been done, the disconnection, the cutting if it's needed, is on us.
Not every spa is a portable, plug-and-play unit. Some are built into a deck or patio as a permanent fixture, poured or set in place during construction. These take more planning than a portable tub, since removing one often means some amount of deck or patio demolition around it, not just unplugging and rolling it away. If you're not sure which category your spa falls into, send a photo and we'll walk you through what the job would actually look like.
Removing a hot tub generally doesn't require a city permit, since nothing new is being built or installed, but that's not the same as having a free pass in every community. Some HOAs and condo associations have their own rules about contractor access, parking for a truck or trailer, or notice requirements before work happens on a shared property. If you're in an HOA or a managed community, it's worth a quick check with your property manager before scheduling, just so removal day goes smoothly.
No. We can drain it on-site. If it's already drained, that just saves a step, but it's not something you need to handle beforehand.
Yes. Whether it still runs or hasn't worked in years makes no difference to the removal itself.
In most cases, yes, though these jobs usually need a look beforehand since they can involve some deck or patio work around the spa itself.
The metal components, pump, heater, and wiring, get recycled separately. The acrylic shell and foam insulation go to standard disposal.
A straightforward tub with clear access is usually a same-day job, often just a couple of hours. One that needs to be cut apart on-site takes longer, but it's still generally finished the same day it starts.
That's our core coverage area, all 35 cities across the Valley. If you're just outside it, call anyway and we'll let you know.
Call or text a few photos and we'll tell you what the job looks like and what it costs.
Call (818) 814-8011 Text Us